Get started with 3D Printing at Blazing Speed. The Form 4 from $5,846 (ex-gst) BUY NOW
Seamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.
Let Form Wash (V2) auto-clean your parts for the appropriate time thoroughly with 3x more agitation than the previous generation.
Tailor the solvent volume to the size and quantity of your parts. Use lower solvent quantities for smaller parts and builds to increase resource efficiency.
Our recommendation is using IPA for the best cleaning performance, but alternative solvents such as TPM are also compatible with Form Wash (V2).
Parts travel straight from the Form 3+ to Form Wash (V2). Opt to go glove-free and keep parts directly on the build platform.
Simply set the appropriate time and let Form Wash (V2) get to work.
Approximate wash time when using fresh isopropyl alcohol (IPA)
IPA volume for removable wash bucket
Amount of prints per IPA refill in regular use
Once washing completes, Form Wash (V2) automatically lifts parts out of the IPA, avoiding over-soaked, warped prints. Parts air dry and are ready when you are.
A custom hydrometer tool to check IPA saturation.
Behind the wash bucket to keep finishing tools tidy.
Easy IPA transfer into and out of the wash bucket.
| Post-Processing Tech Specs | Form Wash (V2) |
|---|---|
| Printer Compatibility | Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2 |
| Dimensions | 31.5 x 29.3 x 40.5 cm 12.4 x 11.5 x 15.9 in Height when open: 71.4 cm (28.1 in) |
| Weight | 8.6 kg (without solvent) 18.9 lbs (without solvent) |
| Bucket Volume | 14.4 L 3.8 US gal |
| Maximum Part Size | 20 x 14.5 x 19.5 cm 7.9 x 5.7 x 7.6 in |
| Suggested Operating Environment | Suggested 18—28 °C Suggested 64—82 °F |
| Agitation Method | Magnetically coupled impeller |
| Included Accessories | a. Wash Bucket b. Wash Basket c. Hydrometer d. 2x Platforms Mounts |
| Power Requirements | 90–240 V 2.0 A 50/60 Hz 50 W |
| Compatible Solvents | Formlabs Resin Washing Solution, IPA, TPM, Water |
Form Cure (V2) is finely tuned to bring parts to their maximum mechanical
DEGREES
CELSIUS
An advanced heating system precisely controls curing temperatures up to 80 °C
NANO
METERS
13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials
REVOLUTION
PER MINUTE
A rotating turntable provides uniform exposure during post-curing
For Standard Resins, simply use Form Cure (V2) default time and temperature. For all other materials, use unique recommended settings for optimum performance.
Form Cure (V2) turntable rotates to provide uniform exposure.
The heating system preheats the chamber to get parts ready for optimum post-curing.
Once the chamber is heated, 13 LEDs trigger the post-curing reaction, bringing parts to their maximum mechanical properties.
| Post-Processing Tech Specs | Form Cure (V2) |
|---|---|
| Printer Compatibility | Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2 |
| Dimensions | 33.7 × 40.4 × 37.2 cm 13.3 × 14.0 × 15.9 in |
| Weight | 12.1 kg 26.7 lb |
| Turntable Diameter | 23.5 cm 9.25 in |
| Maximum Part Height | 24.5 cm 9.64 in |
| Maximum Cure Chamber Temperature | 100 °C 212 °F |
| Light Source | 48 multi-directional LEDs |
| LED Power | 150 W |
| LED Radiant | 50 W |
| LED Wavelength | 405 nm |
| Power Requirements | Input (NA) 100 - 120 V VAC, 50-60 Hz, 15 A Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A |
Once time is up, parts are fully cured and ready for peak performance.
Wash and cure large parts and bigger batches of parts with Form Wash L (V2) and Form Cure L, our large-format automated post-processing solution for high-volume 3D printing.
Sign up to receive updates, promotions, and sneak peaks of upcoming products. Plus 20% off your next order.
