Technical Specs
| FUSE BLAST | |
|---|---|
| Printer compatibility | Fuse Series SLS 3D Printers Third-party powder bed fusion 3D printers |
| Minimum dimensions for convenient access (W × D × H) | 145 × 150 × 210 cm 57.4 × 59.6 × 82.6 in |
| Product dimensions (W × D × H) | 100 × 75 × 175 cm 39 × 29.6 × 68.7 in Height when open: 195 cm (76.8 in) |
| Product weight | 164 kg (without blasting media) 360 lb (without blasting media) |
| Hopper capacity | Media hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media Waste hopper capacity 10.6 L |
| Operating environment | 10–36 ºC 50–96.8 ºF Elevation up to 7500 ft / 2286 meters |
| Air handling | Negatively pressurized hood with replaceable HEPA filter Independent venting system |
| Power requirements ¹ | EU: 230 VAC, 3 A (no dedicated circuit or vacuum required) US: 120 VAC, 6 A (no dedicated circuit or vacuum required) |
| Power requirements ² | N/A |
| Vacuum requirement | No vacuum required |
| Compressed air requirements | Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar. Regulate pressure input between 90-120 PSI / 6-8 bar. Typically achieved by a single 4 HP compressor. |
| Connectivity | Wi-Fi (2.4 GHz) Ethernet (1000 Mbit) USB 2.0 |
| Wi-Fi connectivity | Protocol: IEEE 802.11 b/g/n/ac Frequency: 2.4 / 5.0 GHz Supported security: WPA/WPA2 |
| Ethernet connectivity | RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port. Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T. |
| USB connectivity | USB (rev 2.0) C port with a USB A-C or C-C cable |
| Sound emission | Does not exceed 75 dB(A) |
| Product control | Interactive touchscreen, foot pedals for manual control |
| Build chamber dimension | N/A |
| Build chamber weight | N/A |
| Included accessories | Transfer container Control pedals ESD wrist strap 7mm socket wrench Blast orifice (3mm) Blast orifice (4mm - installed) T-20 driver Floor mat |
| Tumbling basket dimensions | Internal diameter: 450 mm / 17.7” Opening diameter: 345 mm / 13.6” Basket depth: 250 mm / 9.8” Basket is removable without tools. Fits a full Fuse build volume. |
| Internal work area (W x D x H) | 71 x 55 x 67 cm 27.9 x 21.6 x 26.3 in |
| Accessible work area (W x D x H) | 57 x 50 x 67 cm 22.4 x 19.6 x 26.4 in (basket removed) |
